Rickter Hulls - Available in Fiberglass $6500.00 or Carbon Fiber $9500.00 Authorized Dealer


XFS

The XFS was designed for hard core freestyle but with adjustable ride features to assist learning by all rider skill levels.

Features
  • Extra short hull for maneuverability
  • Extra adjustable binding system
  • The tray bottom was lowered to allow your feet on each side of the pump to improve the center of gravity to a lower position when riding. The angle was also changed to bring the rider stance forward
  • The rear rail was lip rocker raised exponentially to allow easier back flip rotation
  • Bond rails are now radiused at 45 degrees for better grip during turns
  • Completely new hood top cover design resulting in a larger engine compartment access
  • Structural design edges have been added to the hull to increase strength and rigidity
  • Increased front tray padding may now be used for knee support during no-handed aerial freestyle tricks
  • Recessed pump and the intake track assists in keeping the XFS hooked up for aerial jumps and flips


XFR

The XFR was designed for hard core freestyle but with adjustable ride features to assist learning by all rider skill levels.

Features
  • Slightly Heavier Layup process to withstand those big surf riding conditions.
  • Tray Has been extended to allow the riders stance to be farther forward.
  • Extra adjustable binding system.
  • The tray bottom was lowered to allow your feet on each side of the pump to improve the center of gravity to a lower position when riding.
  • The rear rail was lip rocker raised exponentially to allow easier back flip rotation.
  • Bond rails are now radiused at 45 degrees for better grip during turns.
  • Completely new hood top cover design resulting in a larger engine compartment access.
  • Structural design edges have been added to the hull to increase strength and rigidity.
  • Increased front tray padding may now be used for knee support during no-handed aerial freestyle tricks.
  • Recessed pump and the intake track assists in keeping the XFR hooked up for aerial jumps, flips, and choppy surf conditions.


FS2/FR2

The preferred Rickter model for Freeriding and Freestyle are the FS2/FR2 hulls. Available in black base and white base graphics. The quintessential Rickter hull model for all riding conditions.

Features
  • Engine & pump are set back 2 inches (5cm) from the original configuration of the FS1 making for a reduced landing impact for the rider.
  • Intake duct area has been enlarged to keep the pump loaded prior to aerial launches.
  • Allows flat water agility combined with the stability needed for big wave freeriding in heavy offshore conditions.


EVO FS2

fter hundreds of hours of development and testing, Rickter is proud to present the FS2 EVO. The FS2 Evo Hull now more closely resembles the XFS with the signature low profile hood design and sleeker upper deck lines to bring it all together.

Features
  • Wider and more angled bond rails similar to that on the XFS. This allows the rider to carve sharply with ease as well as promote stability.
  • Larger pump intake area which allows more water to flow into the pump for better hook-up.
  • Redesigned nose area to allow for better pop when hitting setup wakes.
  • New low profile XFS hood design.
  • Designed for all around rider who enjoys Surf-Riding, Carving Buoys, Flat-water freestyle tricks, and even back-flips!


EVO FR2

fter hundreds of hours of development and testing, Rickter is proud to present the FR2 EVO. The FR2 Evo Hull now more closely resembles the XFS with the signature low profile hood design and sleeker upper deck lines to bring it all together.

Features
  • Slightly Heavier Layup Process than FR2 Evo to help withstand abuse from big surf conditions.
  • Wider and more angled bond rails similar to that on the XFS. This allows the rider to carve sharply with ease as well as promote stability.
  • Larger pump intake area which allows more water to flow into the pump for better hook-up.
  • Redesigned nose area to allow for better pop when hitting setup wakes.
  • New low profile XFS hood design.
  • Designed for all around rider who enjoys Surf-Riding, Carving Buoys, Flat-water freestyle tricks, and even back-flips!


All Hulls Include: Rickter hull, hood, adjustable footwell binding system, billet scupper, hood prongs and handlepole bracket.

Contact Us for more information on purchasing a Rickter Hull.